PASS includes LED Data (data data), Simulation (simulation of heat dissipation and optical system design, lighting environment), and Prototype ( Product design prototype), System Metrology (preliminary test), assist lighting manufacturers to import LED products and optimize the design, which can save time and cost.
LLFY cooperates with other lighting accessories manufacturers (optical design, thermal processing, intelligent drive, etc.) to provide an electronic platform for easy search, allowing lighting manufacturers to find high-quality lighting accessories faster. Osram Lighting finally mentioned six main energy management systems (ENCELIUM Energy Management System), including personnel induction control, intelligent scheduling, adjustment according to tasks,
setting energy-saving goals, personal control and daylight utilization, which can reach 50%~75 % Energy saving. Through the OSRAM energy management system, energy demand can be reduced, the cost will be recovered in about 3-5 years, the real-time energy performance return, and the establishment of a comprehensive energy saving concept. Finally, Osram Lighting mentioned the lighting of the Internet of Things.
It also uses various waterproof led wall pack with sensor devices that can connect to the Internet as the operating interface, and then uses the Gateway with Zigbee wireless transmission as the communication between the handheld device and the lighting fixture. bridge. At present, one Gateway can control 50 lamps. Lightify opens the starting point for future lighting devices and cloud control. Normal 0 0 2 false false false EN-US ZH-TW X-NONE MicrosoftInternetExplorer4
https://www.nbsunlux.com/product/ul-outdoor-light/mini-led-wall-pack/
LLFY cooperates with other lighting accessories manufacturers (optical design, thermal processing, intelligent drive, etc.) to provide an electronic platform for easy search, allowing lighting manufacturers to find high-quality lighting accessories faster. Osram Lighting finally mentioned six main energy management systems (ENCELIUM Energy Management System), including personnel induction control, intelligent scheduling, adjustment according to tasks,
setting energy-saving goals, personal control and daylight utilization, which can reach 50%~75 % Energy saving. Through the OSRAM energy management system, energy demand can be reduced, the cost will be recovered in about 3-5 years, the real-time energy performance return, and the establishment of a comprehensive energy saving concept. Finally, Osram Lighting mentioned the lighting of the Internet of Things.
It also uses various waterproof led wall pack with sensor devices that can connect to the Internet as the operating interface, and then uses the Gateway with Zigbee wireless transmission as the communication between the handheld device and the lighting fixture. bridge. At present, one Gateway can control 50 lamps. Lightify opens the starting point for future lighting devices and cloud control. Normal 0 0 2 false false false EN-US ZH-TW X-NONE MicrosoftInternetExplorer4
https://www.nbsunlux.com/product/ul-outdoor-light/mini-led-wall-pack/
Contact: China IP65 waterproof industrial led light: Shanghai Yueyang Exhibition Service Co. Electric lamps, outdoor lamps, indoor lamps, industrial lamps, special-purpose lamps, interior design lighting, home and decorative lamps; bulbs, electric bulbs, discharge lamps, bulbs and accessories,
lighting control systems, electronic tubes, lighting system auxiliary engineering Wait. In 1905, Nairobi became the capital of the British East African Protected Territory. Registration method: The deadline for registration for the exhibition is subject to the completion of the booth reservation.com Address: Shanghai Huguangdong Room 306, Building 2, Fox Business Building, No., Ltd. The demand for LED lighting is driven by the global low-carbon trend. Kenya’s economy is developing rapidly, and Kenya’s urbanization process has been continuously promoted during the development process. Nairobi has ’Little Paris in East Africa’ The reputation of is a lively and interesting cosmopolitan city,
the city is shaded with trees and flowers, and there is also a ’green city under the sun’ Known as. The manufacturing industry, including tobacco, processed food and beverages, is now the main industry. Market introduction: Kenya is a trade transit center in East Africa. ?? Exhibits range:
LED lights, LED technology, LED applications, commercial lighting, industrial lights, outdoor lights, holiday lights, decorative and custom-made lamps, recessed lights, etc. Exhibition introduction: One year The Kenya International Lighting Exhibition is the largest lighting exhibition in East Africa and is held in the same hall as the Kenya Architecture Exhibition (BUILDEXPO). For many low-income households, kerosene cooking and lighting are very common. Development potential. The last exhibition attracted 165 lighting companies from 15 countries and regions including Egypt, South Africa, India, China, Turkey, and Dubai.2016 Kenya International LED Lighting and Construction Exhibition Exhibition time: (one year) Venue:
https://www.nbsunlux.com/product/ufo-high-bay-light/dob-high-bay-light-ufo-ip65-waterproof-industrial-led-light-factory-ufo-led-high-bay.html
lighting control systems, electronic tubes, lighting system auxiliary engineering Wait. In 1905, Nairobi became the capital of the British East African Protected Territory. Registration method: The deadline for registration for the exhibition is subject to the completion of the booth reservation.com Address: Shanghai Huguangdong Room 306, Building 2, Fox Business Building, No., Ltd. The demand for LED lighting is driven by the global low-carbon trend. Kenya’s economy is developing rapidly, and Kenya’s urbanization process has been continuously promoted during the development process. Nairobi has ’Little Paris in East Africa’ The reputation of is a lively and interesting cosmopolitan city,
the city is shaded with trees and flowers, and there is also a ’green city under the sun’ Known as. The manufacturing industry, including tobacco, processed food and beverages, is now the main industry. Market introduction: Kenya is a trade transit center in East Africa. ?? Exhibits range:
LED lights, LED technology, LED applications, commercial lighting, industrial lights, outdoor lights, holiday lights, decorative and custom-made lamps, recessed lights, etc. Exhibition introduction: One year The Kenya International Lighting Exhibition is the largest lighting exhibition in East Africa and is held in the same hall as the Kenya Architecture Exhibition (BUILDEXPO). For many low-income households, kerosene cooking and lighting are very common. Development potential. The last exhibition attracted 165 lighting companies from 15 countries and regions including Egypt, South Africa, India, China, Turkey, and Dubai.2016 Kenya International LED Lighting and Construction Exhibition Exhibition time: (one year) Venue:
https://www.nbsunlux.com/product/ufo-high-bay-light/dob-high-bay-light-ufo-ip65-waterproof-industrial-led-light-factory-ufo-led-high-bay.html
This is a great Wholesale UL outdoor light Factory for Chinese national LED brands to seek global status. China LED Alliance Finance, Japan LED Alliance University 4 months from the beginning of 2016, there have been many LED companies such as Kingsun Optoelectronics, Sanan Optoelectronics, Hongli Optoelectronics, NVC Lighting and other LED companies preparing financial investment funds. Toshiba sold its subsidiary that manufactures and sells light bulbs and lighting appliances in China to the China Konka Group, including two subsidiaries in Hong Kong and Fuzhou, and part of the business of the Kunshan subsidiary.
The former president of Mapletree Gu Zai is the founder of the technological equipment and industrial development of plant factories in Japan and the world. Toshiba uses three-color LED chips in blue, white, and bulb colors to simulate the sky in the morning, noon to dusk, and Panasonic focuses on color temperatures suitable for reading. More importantly, Toshiba still holds the silicon substrate LED department and technology patents acquired from Preh of the United States in 2012. Japanese LED looks even worse, and even large corporate giants seem to be at stake.
Some of the more established companies include Nikkiso and Tokuyama. In fact, Nichia continues to expand the scope of application and extend the validity period of a number of patents. The advantages are high luminous efficiency, low cost, high-precision chromaticity and brightness, and the image content can be clearly displayed outdoors. In the OLED field, a typical example of Japanese industry-university cooperation is the cooperation between Japanese OLED technology startup Kyulux and Kyushu University in Japan. Chiba University is also at the forefront in the research and development of plant factory technology. The penetration rate of LED lighting in public spaces in Japan is far from the target
. It is often the bosses running out of touch and employees pulling banners to ask for salary. After this round of financing, Infotech’s Alex Banh and Qingyun Ventures’ Ye Dong will both join the company’s board of directors and contribute their rich experience in emerging Asian markets and technologies. In ’Made in China 2025’ In the Technology Roadmap for Key Fields, the penetration rate target for general lighting in 2020 is 60%, and the target for 2025 is 80%
https://www.nbsunlux.com/product/ul-outdoor-light/
The former president of Mapletree Gu Zai is the founder of the technological equipment and industrial development of plant factories in Japan and the world. Toshiba uses three-color LED chips in blue, white, and bulb colors to simulate the sky in the morning, noon to dusk, and Panasonic focuses on color temperatures suitable for reading. More importantly, Toshiba still holds the silicon substrate LED department and technology patents acquired from Preh of the United States in 2012. Japanese LED looks even worse, and even large corporate giants seem to be at stake.
Some of the more established companies include Nikkiso and Tokuyama. In fact, Nichia continues to expand the scope of application and extend the validity period of a number of patents. The advantages are high luminous efficiency, low cost, high-precision chromaticity and brightness, and the image content can be clearly displayed outdoors. In the OLED field, a typical example of Japanese industry-university cooperation is the cooperation between Japanese OLED technology startup Kyulux and Kyushu University in Japan. Chiba University is also at the forefront in the research and development of plant factory technology. The penetration rate of LED lighting in public spaces in Japan is far from the target
. It is often the bosses running out of touch and employees pulling banners to ask for salary. After this round of financing, Infotech’s Alex Banh and Qingyun Ventures’ Ye Dong will both join the company’s board of directors and contribute their rich experience in emerging Asian markets and technologies. In ’Made in China 2025’ In the Technology Roadmap for Key Fields, the penetration rate target for general lighting in 2020 is 60%, and the target for 2025 is 80%
https://www.nbsunlux.com/product/ul-outdoor-light/
Scientists at the National University of Singapore have developed energy-saving ultra-thin light-emitting diodes (Llight Emitting Diode, LED), which is expected to be used in the next generation of communication technology. The team used extremely thin insulators to greatly reduce the current required to trigger the LED light, which is 10,000 times less current than the two-dimensional semiconductor LED. However,
the electro-optical effect only converts part of the current into light, and most of it is converted into heat dissipation. And indicate ’;from’;, unauthorized reprinting, reprinting out of chapter and other acts, this website will be held for legal responsibility! E-Mail:service@ledinside. Studies have shown that an insulating layer a few nanometers thick can suppress current leakage without the need for additional resistance. I
t is still a big challenge to achieve high LED efficiency.com. At present, UFO High Bay Lights Factory research teams have used graphene-like materials to make LEDs. If you want to transmit a large amount of information, you need to integrate energy-saving, high-speed LEDs on the chip. Because the two-dimensional graphene-like structure is only carbon atom thick, has clear light-emitting properties and can be placed on a microchip, it has become a very popular semiconductor material in recent years. Professor Goki Eda of the Department of Physics and Chemistry of the National University of Singapore led the research team to successfully develop a high-performance ultra-thin LED, which contains only a few layers of carbon atoms, which can effectively reduce the energy lost by the LED in the electro-optical effect. For information processing technology,
the complete conversion of electrical signals (Electrical) into optical signals (Optical Signals) is very important.’ (Text: Annie) For reprinting, E-Mail authorization from this website is required. The research team found that energy loss can be significantly reduced by preventing current from leaking from the emissive layer (EML) to the metal electrode (Metal Electrodes). Professor Eda said, ’Because our design ensures the least waste of electricity and the equipment can operate at extremely low currents, this technology will have a great impact on future communication technologies
https://www.nbsunlux.com/product/ufo-high-bay-light/
the electro-optical effect only converts part of the current into light, and most of it is converted into heat dissipation. And indicate ’;from’;, unauthorized reprinting, reprinting out of chapter and other acts, this website will be held for legal responsibility! E-Mail:service@ledinside. Studies have shown that an insulating layer a few nanometers thick can suppress current leakage without the need for additional resistance. I
t is still a big challenge to achieve high LED efficiency.com. At present, UFO High Bay Lights Factory research teams have used graphene-like materials to make LEDs. If you want to transmit a large amount of information, you need to integrate energy-saving, high-speed LEDs on the chip. Because the two-dimensional graphene-like structure is only carbon atom thick, has clear light-emitting properties and can be placed on a microchip, it has become a very popular semiconductor material in recent years. Professor Goki Eda of the Department of Physics and Chemistry of the National University of Singapore led the research team to successfully develop a high-performance ultra-thin LED, which contains only a few layers of carbon atoms, which can effectively reduce the energy lost by the LED in the electro-optical effect. For information processing technology,
the complete conversion of electrical signals (Electrical) into optical signals (Optical Signals) is very important.’ (Text: Annie) For reprinting, E-Mail authorization from this website is required. The research team found that energy loss can be significantly reduced by preventing current from leaking from the emissive layer (EML) to the metal electrode (Metal Electrodes). Professor Eda said, ’Because our design ensures the least waste of electricity and the equipment can operate at extremely low currents, this technology will have a great impact on future communication technologies
https://www.nbsunlux.com/product/ufo-high-bay-light/
The led portable lights factory is to use a high-precision scanning mirror made based on MEMS technology (Micro-Electro-Mechanical System) to periodically reflect the laser light path at different angles, forming a projection surface much higher than the human eye Fast refreshing image of response rate. Its pixel magnitude can also be close to DLP.
These factors limit the use of this solution in smart headlights with high pixel requirements. 02 Analysis of light source technology route (1) LED matrix Based on the small size, easy drive, fast response and other characteristics of LEDs, using multiple LEDs to form rows, columns or matrix arrangements is the basic solution to realize entry-level multi-pixel smart headlights. In addition, they need to pass strict vehicle-level verification. Figure 4 An example of DLP-style smart headlights (picture source:
BENZ and TI official website) (4)mu;AFS is the industry’s abbreviation for Addressable LED Pixel Array, which is a special LED technology developed for multi-pixel intelligent headlight system. In addition, because the power density is much higher than that of ordinary displays, the LED matrix backlight generates a lot of heat, so that the LCD panel cannot be directly placed on the backlight like an LCD display. 03 Summary and Prospects Remove the laser scanning headlights, which are not yet mature in technology. Compared with the DLP type headlight source system based on projection technology introduced below, the LCD type has the advantages of relatively low cost, relatively small volume, wide stretchable angle of the light type, and high contrast between light and dark. For example, as shown in Figure 8 below:
Figure 8 The organic combination of several technologies shows that the multi-pixel intelligent headlight system as the future development direction of automotive lighting has broad market prospects, abundant technical reserves, and unlimited innovation space. The advantage of laser + DMD is that thanks to the strong directionality of the laser, even if phosphor powder is needed to convert white light, the light exit hole of the optical machine can still be made very small
https://www.nbsunlux.com/product/flood-light/rechargeable-work-light-flood-light/
These factors limit the use of this solution in smart headlights with high pixel requirements. 02 Analysis of light source technology route (1) LED matrix Based on the small size, easy drive, fast response and other characteristics of LEDs, using multiple LEDs to form rows, columns or matrix arrangements is the basic solution to realize entry-level multi-pixel smart headlights. In addition, they need to pass strict vehicle-level verification. Figure 4 An example of DLP-style smart headlights (picture source:
BENZ and TI official website) (4)mu;AFS is the industry’s abbreviation for Addressable LED Pixel Array, which is a special LED technology developed for multi-pixel intelligent headlight system. In addition, because the power density is much higher than that of ordinary displays, the LED matrix backlight generates a lot of heat, so that the LCD panel cannot be directly placed on the backlight like an LCD display. 03 Summary and Prospects Remove the laser scanning headlights, which are not yet mature in technology. Compared with the DLP type headlight source system based on projection technology introduced below, the LCD type has the advantages of relatively low cost, relatively small volume, wide stretchable angle of the light type, and high contrast between light and dark. For example, as shown in Figure 8 below:
Figure 8 The organic combination of several technologies shows that the multi-pixel intelligent headlight system as the future development direction of automotive lighting has broad market prospects, abundant technical reserves, and unlimited innovation space. The advantage of laser + DMD is that thanks to the strong directionality of the laser, even if phosphor powder is needed to convert white light, the light exit hole of the optical machine can still be made very small
https://www.nbsunlux.com/product/flood-light/rechargeable-work-light-flood-light/
In addition, the yield rate is limited and the cost is difficult to reduce. When the transfer module sucks up the LED, the Micro LED can be separated from the temporary substrate by disconnecting the column, and then transferred and pressed down to the TFT or PCB board, but this step also tests whether the LED itself is strong enough and can still withstand pressure Keep it intact, and red light is relatively more fragile and breakable than blue and green light.. If it is too late to develop alternative applications to the existing markets of OLED and LCD,
there will not necessarily be a competitive advantage. But he believes that technologies that OLED or LCD cannot reach are opportunities for Micro LED, especially niche applications with high technology thresholds such as e-sports screens, AR and transparent displays, which may provide hope for the development of Micro LED in Taiwan. The ultra-thin glass substrate was used, which was technically successfully realized.
Only breakthroughs can be achieved. Transfer, that is to say, only a specific block in the entire wafer may meet all standards, and the yield rate is not stable enough, resulting in less transferable area, and the overall utilization rate is also greatly reduced. In addition to the Micro LED RGB three-color yield and efficiency issues that need to be re-adjusted, if monochromatic Micro LED There are other problems with the way of combining quantum dots (QD) color conversion materials.
He believes that Wholesale UL outdoor light Factory LED has the opportunity to develop into the mainstream technology of display light sources in the AR field, but there are still many technical problems to be overcome. Fang Yanxiang bluntly said that Micro LED will take some time in terms of technology development. Not only the red light yield of Micro LED needs to be improved, but the Micro LED with weakened structure is even more difficult to find.
https://www.nbsunlux.com/product/ul-outdoor-light/
there will not necessarily be a competitive advantage. But he believes that technologies that OLED or LCD cannot reach are opportunities for Micro LED, especially niche applications with high technology thresholds such as e-sports screens, AR and transparent displays, which may provide hope for the development of Micro LED in Taiwan. The ultra-thin glass substrate was used, which was technically successfully realized.
Only breakthroughs can be achieved. Transfer, that is to say, only a specific block in the entire wafer may meet all standards, and the yield rate is not stable enough, resulting in less transferable area, and the overall utilization rate is also greatly reduced. In addition to the Micro LED RGB three-color yield and efficiency issues that need to be re-adjusted, if monochromatic Micro LED There are other problems with the way of combining quantum dots (QD) color conversion materials.
He believes that Wholesale UL outdoor light Factory LED has the opportunity to develop into the mainstream technology of display light sources in the AR field, but there are still many technical problems to be overcome. Fang Yanxiang bluntly said that Micro LED will take some time in terms of technology development. Not only the red light yield of Micro LED needs to be improved, but the Micro LED with weakened structure is even more difficult to find.
https://www.nbsunlux.com/product/ul-outdoor-light/
National Star Plant Lighting China Street Lamps Factory leads the new development direction of modern biological agricultural lighting technology. The development direction of Sunlight has received strong support from various departments. The above factors restrict the development of China’s plant lighting industry to varying degrees.
Introduced the latest research and development results and future breakthrough directions of NationStar’s plant lighting LED, which attracted high attention from experts and enterprises in related fields. In the future, NationStar Optoelectronics will continue to use its superior platform in the packaging field, guided by market demand, through diversified research and development, focusing on efficient and even light distribution plant lighting LED light source products and all-round plant lighting LED solutions to lead The technology and products lead the new direction of the development of modern plant lighting. In addition, compared with traditional plant lighting products, plant lighting LED products are more expensive and have a long verification period. Expensive and other issues.
Li Honghao, director of plant lighting technology of the non-visual light source division of NationStar Optoelectronics, was invited to give a speech at the Bio-Agricultural Lighting Technology Forum with experts and scholars from universities and research institutes at home and abroad.
NationStar’s plant lighting LED products have greatly improved the product’s light output area and spatial distribution uniformity, effectively reducing the cost of LED lighting in the same area of the plant factory; increasing the light quantum flux per unit area, meeting the special needs of plant growth, and effectively solving customer pain points , Leading the new development direction of modern plant lighting.
At present, the domestic plant lighting industry is still in the early stage of development. According to industry data analysis, the market for plant LED lighting systems and lamps is increasing year by year. Plant lighting products are still mainly exported for low-end products.
https://www.nbsunlux.com/product/street-light/
Introduced the latest research and development results and future breakthrough directions of NationStar’s plant lighting LED, which attracted high attention from experts and enterprises in related fields. In the future, NationStar Optoelectronics will continue to use its superior platform in the packaging field, guided by market demand, through diversified research and development, focusing on efficient and even light distribution plant lighting LED light source products and all-round plant lighting LED solutions to lead The technology and products lead the new direction of the development of modern plant lighting. In addition, compared with traditional plant lighting products, plant lighting LED products are more expensive and have a long verification period. Expensive and other issues.
Li Honghao, director of plant lighting technology of the non-visual light source division of NationStar Optoelectronics, was invited to give a speech at the Bio-Agricultural Lighting Technology Forum with experts and scholars from universities and research institutes at home and abroad.
NationStar’s plant lighting LED products have greatly improved the product’s light output area and spatial distribution uniformity, effectively reducing the cost of LED lighting in the same area of the plant factory; increasing the light quantum flux per unit area, meeting the special needs of plant growth, and effectively solving customer pain points , Leading the new development direction of modern plant lighting.
At present, the domestic plant lighting industry is still in the early stage of development. According to industry data analysis, the market for plant LED lighting systems and lamps is increasing year by year. Plant lighting products are still mainly exported for low-end products.
https://www.nbsunlux.com/product/street-light/
